We supply liquid helium and nitrogen storage dewars, gas handling and safety equipment and a wide range of cryogenic components for low temperature measurement systems.
Our laboratory essentials include stycast epoxy for fixing cryogenic equipment, indium wire and foil for vacuum flanges and apiezon grease for heatsinking and lubrication.
Low temperature work makes great demands upon the electrical wiring used. Wire, connectors and heatsinking must be selected to minimise heatleak at low temperature. Laboratory cables need to be made professionally for low-noise performance.
Sample mounting components include non-magnetic JEDEC chip carriers and mPuck sample mounting stages for experiments below 4K, especially in vacuum when sample thermalisation needs to be achieved via demountable electrical connections.
CMR-Direct produces the industry's only commercial low temperature transformers, which coupled with Lock-In detection and narrow-band filtering, can provide ultra-low-noise performance for AC Resistivity and AC Susceptibility measurements.
New measurement cable ranges off-the-shelfJul 31, 2012
Following customer demand we're pleased to introduce our new range of ready-made measurement cables.
We're aware that in many laboratories cables are used on…
Measurement Cable - SP2 to B2 (5m) to SP2
Professionally made laboratory measurement cable
Individually serial numbered, tested and certificated
5m length of B2 cable (3.5mm di.)
Both ends carry a low-noise SP2 connector, wired pin to pin.
Cable shields connected to both connector bodies (can be removed to break ground loops)
-SP2-1-600x600.jpg "Measurement Cable - SP2 to B2 (5m) to SP2 [05-44-250]")
-SP2-2-600x600.jpg "Each cable individually serial numbered and certificated.")
Jul 31, 2012
Following customer demand we're pleased to introduce our new range of ready-made measurement cables.
We're aware that in many laboratories cables are used on… 
-SP2-1-146x146.jpg)
or you can request a quotation or proforma invoice at checkout