Your shopping cart is empty!
Categories
Excellent ServiceEasy ordering, quick delivery /24-Medium/stars-5.png)
Andreas Hoffstädt ADLARES GmbH |
Room temperature connectors on cryostats often don't stay at room temperature - during cooldown or cryogen filling they can often become cold enough to condense water on, or even freeze.
This is why our fully metal-shielded connectors not only provide a waterproof seal between plug and socket, but the hermetic receptacles, typically mounted on the cryostat also offer the highest levels of leak-tightness commercially available.
This is why our fully metal-shielded connectors not only provide a waterproof seal between plug and socket, but the hermetic receptacles, typically mounted on the cryostat also offer the highest levels of leak-tightness commercially available.
This pin configuration is the conventional one - with pins on the plug. When the equipment connected to the plug has voltages greater than 50V it is s...
This pin configuration is used when the equipment connected to the plug has voltages greater than 50V and it is therefore safer to have a socket confi...
This pin configuration is used when the equipment connected to the plug has voltages greater than 50V and it is therefore safer to have a socket confi...
This pin configuration is the conventional one - with pins on the plug. When the equipment connected to the plug has voltages greater than 50V it is s...
Fully shielded connector collet optimised for 3.7mm cable. Approx 42.7mm connector length. Balanced contact configuration for AC ...
Fully shielded panel mount receptacle (12mm cutout). Approx 20.9mm connector length. Balanced contact configuration for AC twiste...
Ideal for fitting electronics in shielded enclosures right at the top of your cryostat. Mates to FR24-S [02-31-019] to form a watertight seal. ...
Special 14mm large di collet. Mates to CMR-FR24-S. Connector approx 91mm length; 23mm outer diameter. Please contact us fo...
Ideal for cryostat feedthroughs as all wiring joints can be encapsulated without interfering with the M18x1 mounting thread. Contact us for details of...
Ideal for fitting to breakout boxes so that different length cables can be used on different measurement systems.. Mates to FP24XL-P [02...
Ideal for cryostat feedthroughs as all wiring joints can be encapsulated without interfering with the M18x1 mounting thread. Contact us for details of...
Takes 12.5mm diameter cable. Perfect for use with the K4 room temperature cable [02-32-044]. Mates to FR4-P [02-31-021]. ...
Receptacle cover (FR105Cover [02-31-015]) particularly useful for this connector as the large pins conduct a lot of cold to outside the cryostat durin...
Used for FP24XL-P 24-way connectors and FP27XL-P 27-way connectors. Used for crimping pins onto wire up to 24AWG (0.6mm). ...
Very useful to prevent water from condensing in hermetic feedhthrough receptacles if they get cold during nitrogen or helium transfers.. ...